0 Items

Rotary vane vacuum pumps are excellent for a variety of low and medium vacuum applications, including general and chemical laboratories, analytics, freeze-drying, manufacturing engineer, and more. When quantities of air or gas are contained within a closed space and compacted when the space is mechanically decreased, a rotating vane pump operates.

A rotary vane pump, in its most basic form, is a type of pump that allows air to be compressed within a chamber to generate a vacuum. The positive displacement concept is used in these pumps. A rotor is placed within a stator or housing in rotary vane vacuum pumps.

How Does Rotary Vane Vacuum Pump Work?

If you work in or manage a facility that uses rotary vane vacuum pumps, it’s in your best interest to understand how they work.

The working principle of a lubricated rotary vane vacuum pump are as follows:

  • The concept of rotary vane pump functioning is that pressure is increased by reducing volume. The blades revolve inside the cylinder, and there is almost no wear due to a thin coating of oil within the cylinder.
  • Oil lubrication is created by differential pressure within the housing. Pipes between the housings aid in this endeavor
  • Inside the housing, the rotor is eccentrically positioned. The blades are pressed against the housing wall by centrifugal force, resulting in three chambers that catch the air.
  • When the first chamber opens, air enters the compressor chamber via the suction flange.
  • The following blade shuts the first chamber and opens the second as the rotor rotates. The blades are the farthest apart at this stage, allowing for the most air volume.
  • The oil and gas combination is then squeezed and blasted into the oil separator housing utilizing volume reduction.
  • When the maximum pressure is achieved or the pump is shut off, certain pump designs incorporate exit valves to prevent air backflow.
  • A procedure takes place within the oil separator housing to separate oil and gas from one another. The oil is sent to an oil sump. Between 95 and 98 percent of the oil content in the air may be removed using this method.
  • To eliminate any residual oil particles, the remaining oil and gas combination is passed through fine filter components. A floating valve will later be used to reintroduce these particles into the pump’s oil circuit.
  • The gas may now be released by the air outlet, pipes, or hoses because it is almost oil-free.

Components Of Rotary Vane Pump:

A basic rotary vacuum pump is made up of a casing, a rotor, and a set of radially moving vanes that can be dry-running or lubricated (the latter are the most commonly used in the majority of industrial applications). The rotor is usually the only element of a vane vacuum pump that moves constantly. The rotor and vanes split the operating chamber into two sections inside the housing. As a safety precaution, many vane vacuum pumps have an intake valve.

Single-stage and two-stage rotary vane  pumps are both available. The phases denote the number of times compression has taken place. Due to the fact that gas is only allowed during the high-pressure stage, two-stage pumps may achieve lower pressures than single-stage pumps.

Contact Us Today:

We can assist you with the rotary vane vacuum pump in China installation and maintenance. To talk with a member of our team, please contact us now.